Description
iFlight G40 3 Axis DLSR Aerial Gimbal for SONY 5N,RX-100,BMPCC Camera
Easy Gimbal brushless made by aluminum with vibration dampener on the top alloy and make the gimbal to light, rigid, fast and without gaps.
Features:
•Support Sony NEX5/7,RX-100,BMPCC and other micro -SLR camera
•Support 18-55mm lens
•Ready to Use with 32BIT alexmos Simple BGC
•Support sensitivity parameter adjustment and software 3D pose display
•Support rocker rate mode and position mode
•Aluminum alloy,half arm frame,sturdy and lightweight
•Adjust the focus with the camera,can be adapted to different lens
•Active augmentation technology,closed-loop monitoring and control,more accurate compensation augmentation
•Full adjustable mechanism is designed to allow a perfect balance adjustment to get the best of the best performance
•Support Sony NEX5/7,RX-100,BMPCC and other micro -SLR camera
•Support 18-55mm lens
•Ready to Use with 32BIT alexmos Simple BGC
•Support sensitivity parameter adjustment and software 3D pose display
•Support rocker rate mode and position mode
•Aluminum alloy,half arm frame,sturdy and lightweight
•Adjust the focus with the camera,can be adapted to different lens
•Active augmentation technology,closed-loop monitoring and control,more accurate compensation augmentation
•Full adjustable mechanism is designed to allow a perfect balance adjustment to get the best of the best performance
Specification :
| Support Receiver： | condditional receiver、PPM receiver, DSM2/DSMJ/DSMX receiver | Support Remote Controller Equipment： | PPM/PCM/2.3G |
| Operating Voltage： | DC 7.4V~14.8V （Recommand11.1V，3pcs Li-po battery） | Operating Current： | 200mA-2A |
| Working Enviroment Temperature： | -15℃~65℃ | Processor： | MEGA328P Processor |
| Sensor： | MPU6050 3-axis Gyro、Accelerometer | MAX Angular Rate ： | 2000°/SEC |
| Max Acceleration： | 16g | Control Freqency： | 1600Hz |
| Motor Driver Frequency： | 8/32KHz(Noise power saving driver/No noise smooth driver) | Control accuracy： | 0.1° |
| Control Angle Range： | -45°~45°（roll）, -90°~90°（pitch） | Gimbal controller board： | iFlight ALEXMOS genuine 32-bit Gimbal controller board(2.43b6) |
| Motor： | iPower GBM4108H-120T motor | Gimbal+Controller+Shockproof Board Net Weight: | 564g |
Package included:
1×3 axis brushless camera gimbal (ready to use)
Adjust the center of gravity tips：
The camera with the camera fixed on the head nut,before energizing any swinging camera and then released.The camera can no longer automatically swing fixed on a position it said it had adjusted the focus of the camera , mounted on the circuit board and energized after a good tune focus.
| Support Receiver： | condditional receiver、PPM receiver, DSM2/DSMJ/DSMX receiver | Support Remote Controller Equipment： | PPM/PCM/2.3G |
| Operating Voltage： | DC 7.4V~14.8V （Recommand11.1V，3pcs Li-po battery） | Operating Current： | 200mA-2A |
| Working Enviroment Temperature： | -15℃~65℃ | Processor： | MEGA328P Processor |
| Sensor： | MPU6050 3-axis Gyro、Accelerometer | MAX Angular Rate ： | 2000°/SEC |
| Max Acceleration： | 16g | Control Freqency： | 1600Hz |
| Motor Driver Frequency： | 8/32KHz(Noise power saving driver/No noise smooth driver) | Control accuracy： | 0.1° |
| Control Angle Range： | -45°~45°（roll）, -90°~90°（pitch） | Gimbal controller board： | iFlight ALEXMOS genuine 32-bit Gimbal controller board(2.43b6) |
| Motor： | iPower GBM4108H-120T motor | Gimbal+Controller+Shockproof Board Net Weight: | 564g |
Package INCLUDES:
1x 3 axis CNC Aluminum Gimbal Brushless
3x iPower GBM4108H-150T
1x 32bit alexmos 3 axis bgc
1x damping unit
Note:This is a pre-assembled kit.
Reviews
There are no reviews yet.